Installation guide

| 19
NSS | Addendum for RTM-2, RTM-2.5 and RTM-3
EN
Panning and tilting the camera
When the connection to the FLIR camera is established, pan and tilt panel buttons appear on
the video panel. The left and right arrows control the camera’s pan, while the up and down
arrows tilt the camera.
Press one of the arrow buttons on the panel to control the camera. The camera will move as
long as you press the button.
Zooming the video image
You zoom the video image by using the IN/OUT keys.
There are two different zoom options available, depending on selected FLIR camera source
option. Refer The FLIR camera source options below.
Digital zoom
Only available when the camera is in Infrared mode.
In this mode the zoom is represented in levels (0, 2 and 4 times zoom). Each press on one of
the IN/OUT keys will increment or decrement the zoom level.
Optical zoom
Available in daylight mode.
In this mode the camera will zoom as long as you press the IN/OUT keys.
The FLIR camera source options
The FLIR camera includes both daylight and infrared video sources.
When the infrared source is selected, the following options are available:
Toggle color scheme Cycles through FLIR’s video output color scheme. Each of these
schemes maps a different color to a different temperature
Toggle polarity Inverts the color scheme.
For example, instead of: White = Hot and Black = Cold, it will
become Black = Hot and White = Cold
The camera’s home position
You can set the current pan and tilt position as the camera’s home position.
You can later quickly return to this camera position.
Fusion Link Support
FUSION-Link devices connected to the NMEA 2000 network can be controlled from the NSS.
The integration is currently limited and not supporting the following features:
• Multiple FUSION-Link device connectivity
• VHF channel and Sirius weather controls via FUNSION-Link devices
• DVD controls through the NSS
¼ Note: You must enable audio to control audio on your NSS.
Refer to the Audio section in the NSS Operator for
information about audio control from the NSS.
A Fusion Link device connected to the NMEA 2000 network should automatically be identified
by the NSS. If not, enable the feature from the advanced option in the system settings menu.
MOB
IN
MOB
OUT