Installation guide
16 |
NSS | Addendum for RTM-2, RTM-2.5 and RTM-3
EN
Disabling wireless control
You disable wireless control from a remote device as follows:
1. In the device list, select the wireless device you want to disable
2. Uncheck the always allow option
3. Press and hold on the selected line in the list or press the MENU key to show the menu
4. Select Disconnect
5. On the wireless device, select the view only option
You can now view the NSS display on the wireless devise, but no operation is allowed.
Wireless control of the NSS is re-established by re-starting the App and confirming remote
control.
Operating the NSS with the wireless device
When remote control is accepted, the NSS page will be mirrored to the wireless device.
The NSS image includes softkeys. Tapping these keys works as operating the similar hard keys
on the NSS front panel.
Lets you select which NSS to control if more than one is connected to the
active WIFI-1 unit
Returns to the GoFree Controller page.