Installation guide

| 15
NSS | Addendum for RTM-2, RTM-2.5 and RTM-3
EN
Enable/disable wireless control of NSS
1. Download the Simrad GoFree Controller & Viewer App from the application store to the
wireless device.
2. Start the App, and tap the NSS icon in the GoFree Controller page to request remote control
of the NSS.
The first time you request control from the wireless device, the NSS will prompt you to
confirm remote control from this device.
You have the following options:
Yes Allows control from the wireless device as long as the device is connected
to the WIFI-1 network.
You will have to request remote control again if the wireless device later re-
connects to the WIFI-1 network.
No Allows no control from the wireless device. The NSS display can be viewed
on the wireless device, but no operation is allowed.
Always Allows control of the NSS from this wireless device until you choose to
disable the control. See description later in this section.
When control is confirmed, the connection is immediately established.
All wireless devices that are allowed to control the NSS are listed in the Wifi device list.