User Guide

ManualsBrandsSimrad ManualsRadar BundleSIMRAD NSS evo3S Combo Radar Bundle with Halo20

NSS evo3S |

Quick Guide - EN

NSS evo3S™

Quick Guide

Front panel

L M

A Touch Screen

B Pages/Home key

• Press to open the Home page for page selection and setup options.

C Wheel key user conﬁgurable key. Refer to the Operator manual.

Default without an autopilot connected to the system:

• Short press: toggles between panels on split screen.

• Long press: maximizes active panel on split screen.

Default with an autopilot connected to the system:

• Short press: opens the autopilot controller and puts the autopilot in standby

mode.

• Long press: toggles between panels on split screen.

D Menu key

• Press to display the active panel’s menu.

E Rotary knob

• Turn to zoom or scroll the menu, press to select an option.

F Enter key

• Press to select an option or save settings.

G Exit key

• Press to exit a dialog, return to previous menu level, and clear cursor from panel.

01_EN_988-12573-002

Summary of content (4 pages)

PAGE 1
NSS evo3S™ EN Quick Guide Front panel C B D E F I G H J K L A L M A Touch Screen B Pages/Home key • Press to open the Home page for page selection and setup options. C Wheel key user configurable key. Refer to the Operator manual. Default without an autopilot connected to the system: • Short press: toggles between panels on split screen. • Long press: maximizes active panel on split screen.
PAGE 2
H MOB keys • Press simultaneously the Enter and Exit keys to create a MOB (Man Over Board) at the vessel’s position. I Arrow keys • Press to activate cursor or to move cursor. • Press to navigate through menu items and to adjust a value. J Mark key • Press to place waypoint at vessel position, or at cursor position when cursor is active. • Press and hold to open the Plot dialog from where you can add or manage waypoints, routes and tracks.
PAGE 3
System Controls dialog Used for quick access to system settings. Activate the dialog by: • Pressing the System Controls button. • Swiping from the top of the screen. • Pressing the Power key. ¼ Note: The content of the System Controls dialog depends on connected equipment and active panel. Application pages A B C A B C D E E Home/pages button Application panel Menu button Instrument bar Control bar D Adjust panel size You can adjust the panel sizes in a split page. 1.
PAGE 4
Charts • • • Zoom the chart by using spread or pinch gestures or by using the zoom buttons. Move the view in any direction by panning the chart. Display information about a chart item by tapping the item. N Waypoints To create a waypoint: • Press the Mark key to instantly add a waypoint. • Select the new waypoint option in the menu. ¼ Note: With cursor inactive, the waypoint is placed at vessel’s position. With cursor active, the waypoint is placed at selected cursor position.