Specifications
| 97
GoFreeTM wireless | NSO-II Operator Manual
Enable/disable wireless control of NSO-II
1. Download the Simrad GoFree Controller & Viewer App from the application store to the
wireless device.
2. Start the App, and tap the NSO-II icon in the GoFree Controller page to request remote
control of the NSO-II.
The rst time you request control from the wireless device, the NSO-II will prompt you to
conrm remote control from this device.
You have the following options:
Yes Allows control from the wireless device as long as the device is
connected to the WIFI-1 network.
You will have to request remote control again if the wireless device later
re-connects to the WIFI-1 network.
No Allows no control from the wireless device. The NSO-II display can be
viewed on the wireless device, but no operation is allowed.
Always Allows control of the NSO-II from this wireless device until you choose to
disable the control. See description later in this section.
When control is conrmed, the connection is immediately established.
All wireless devices that are allowed to control the NSO-II are listed in the Wi device list.
Disabling wireless control
You disable wireless control from a remote device as follows:
1. In the device list, select the wireless device you want to disable
2. Uncheck the Always allow option