Installation manual

Specifi cations | 89
Display specifi c specifi cations
DI10 and DI15 MO19
Power Supply 10-32 V DC Power Supply 24 VDC (21-32 VDC)
Environmental IPX6 Environmental IPX6 when fl ush
mounted
Video Input DVI-D only Video Input DVI-D only
Resolution 10.4” TFT SVGA
bonded
Resolution 15” TFT XGA bonded
Supported NMEA0183 sentences
TX / RX GPS
Receive GGA GLL GSA GSV VTG ZDA
Transmit GGA GLL GSA GSV VTG ZDA
Navigation
Receive RMC
Transmit AAM APB BOD BWC BWR RMC RMB XTE
Echo
Receive DBT DPT MTW VLW VHW
Transmit DBT DPT MTW VLW VHW
Compass
Receive HDG HDT HDM
Transmit HDG
Wind
Receive MWV MWD
Transmit MWV
AIS / DSC
Receive DSC DSE VDM AIS sentences are not bridged to or from
SimNet.
MARPA
Transmit TLL TTM These are only output sentences
Comms
NMEA0183 1 x Transmit, 1 x Receive port
External Alarm <250 mA
Supported baud rates 4,800, 9,600, 19,200, 38,400 baud. Note: Port will transmit
and receive at the set baud rate
Ethernet 10/100 base Ethernet, one port
Max number of dis-
plays/processors
4 in any combination NSO or NSE
External Connectors
(rear)
Power, Utility (ext. alarm, NMEA 0183), SimNet (NMEA2000),
Network (1 x ethernet, USB x 1, Video Out (1 x DVI-D, 1 x
DVI-I), Aux. Not used