Installation manual

80 | Commission the system
5 Highlight OK to confi rm that you want
to upgrade your display then press

6 The NSO will automatically shut
down and restart. After 10 seconds
there will be a Simrad logo and
after another 20 seconds basic text
will prompt you to upgrade or start
normally.Press the “1” key followed
by the
key to start the upgrade
or the “0” key to cancel and start
normally
The following updates were found:
00: Normal system start
01: NSE-2.5.33.218-Standard-3.upd
7 The Upgrade will start. At this stage
do not remove the Portable Drive
turn off the NSE. The upgrade will
take about 4-5 minutes.
8 After the upgrade process has
fi nished and you will be prompted
to remove the “update media”
Remove the portable drive and
then press
. The NSO will now
restart.
The update may take a while. Please
be patient
9 The Upgrade process has
fi nished Successful. You MAY
remove the update media.
A System package has been
updated and a restart is
required. Press the check
button to continue.
After the NSO has started accept the safety warning and just take a minute to verify
the software has been upgraded correctly.
Press MENU > MENU > System > About.