Installation manual

Commission the system | 75

CZone Setup

BEP CZone is a NMEA 2000 compliant (SimNet) system that can monitor AC and

DC circuits, as well as control DC circuits. It also features onboard diagnostics,

multifunction timer capabilities, dimming control and handles a wide DC voltage range

(9-32V DC). When connected on the same NMEA 2000 network, the NSO provides a clear

and intuitive user interface for the CZone system.

Activate Czone Feature

To activate CZone functionality the CZone option must be selected in Advanced Settings

of the Settings/System menu.

CZone dipswitch setup

The NSO must be assigned the virtual dipswitch number intended for it in accordance

with the CZone configuration file.

Czone at Startup

Select this option in the Advanced Menu in order to show the Czone Panel as the first

screen at every power up of the NSO.

Czone Backlight

Select this option in the Advanced Menu in order to allow Czone backlight controls to be

applied to the monitor attached to the NSO.

Note: backlight control will only work when the NSO is connected to a DI10 or DI15

display

Editing of the Czone conﬁ guration ﬁ le can be only done by the BEP CZone display

interface (DI), or PC conﬁ guration utility. For installation information on Czone modules,

refer to the BEP CZone Installation Manual.