Installation manual

Commission the system | 71

Radar Transmit,

Standby or off

Press Radar func-

tion button to dis-

play the radar

WIN

Press Menu to bring

up radar options

To make radar ad-

justments.

• select item to

adjust

PLOT

MARK

GOTO

VESSEL

Adjust the setting

value as needed

Setting value is dis-

played on screen

WIN

To conﬁ rm

Broadband Radar™

Interference from some onboard sources can interfere with the

Broadband radar. One symptom of this could be a large target

on the screen that remains in the same relative bearing even if

the vessel changes direction.

Choose from Local interference rejection Low, Med or high.

Default is off

HD Pulse Radar

Range Offset The timing of the transmit and receive circuits can be adjusted

to determine zero range.

Position the vessel stationary about 150-200 m from a straight

jetty or sea wall. Set the radar to 1/8 nm. If the sea wall ap-

pears bent or bowed adjust until the wall appears straight

All Radars

• This will compensate for any physical misalignment of

the scanner in relation to the center line of the vessel Set

the radar to transmit. Point the boat in the direction of a

stationary objet such as a pier or the end of a head land or

peninsular. Adjust the bearing alignment so the heading line

touches the end of the same head land or peninsular.

Set the radar scanner height. The Radar uses this value to cal-

culate sea clutter