Installation manual

56 | Commission the system

There are ten categories of sources such as Compass, Navigation, Position etc. Under

each of these categories a display can be set to receive data from sources as part of the

Simrad group or receive the source data independently from the group (None)

The example below shows the available options for position sources, and that the GS15

GPS is used by all displays with group selection set to Simrad. If you selected the GS10

all displays in the Simrad group would use the GS10 GPS.

Group Source Selection (NONE)

You may prefer one display to receive its position information from the GS10 antenna

independently from the rest of the displays in the source selection group Simrad.

Set the position information to None.

Under the position category,

change group selection from

Simrad to None

PLOT

MARK

GOTO

VESSEL

Select None

PLOT

MARK

GOTO

VESSEL

PLOT

MARK

GOTO

VESSEL

Select the GS10 antenna

WIN

to conﬁ rm and exit

Source selection advanced

Allows the selection of a source not using Simrad group - eg Engine and Tank sources.