Installation manual

Installing the NSO components | 13
DI10 / DI15 Display Panel mount
1 Attach the fl ush mounting template
to the selected mounting position.
2 Drill the four corner radius holes
using a 10 mm (3/8 ”).
3 Drill pilot holes for the four self
tapping screws used to secure the
display. If using M4 machine screws
use a 5 mm (3/16”) drill bit.
4 Cut along the indicated on the template.
5 Secure the display to the surface. 6 Secure the front bezel fi rmly in
place