Operation Manual

46 | Using echosounder

Selecting the ping speed

The Ping Speed controls the rate the transducer uses to send echosounder waves into

the water. A higher ping speed will yield the best results when you are moving across the

water at a high rate of speed or fishing from a dock. The reverberation of too much ping

speed can cause interference on the screen.

The sh echoes

You can select how you want the echoes to appear on the echosounder image.

TRADITIONAL

FISH ECHOES

FISH SYMBOLS AND

DEPTH INDICATION

Using colors

Color palette

Several display color templates with varying degrees of color and

brightness are available.

Bottom coloring

The bottom coloring option colors the entire bottom area in one

brown shade. This will clearly separate fish and structure from the

bottom.

Using the cursor on the echosounder panel

The cursor is by default not shown on the sounder image.

When you press one of the arrow keys the cursor will be

visible, the depth at the cursor position will be shown, the

information window and the history bar will be activated.

You use the arrow keys to move the cursor in any direction

on the display.

To remove the cursor and cursor elements from the panel, press the X key.

Using the cursor to position a waypoint

You can position a waypoint at the cursor position by

pressing the PLOT key as described in the Waypoints,

routes and tracks section.

When the key is pressed the waypoint symbol and ID are

positioned at the cursor position.

MENU WIN