Specifications
Installation | 15
MX525A Connector Conî‚¿guration
Refer to the diagram below for the POWER-DATA
connector located at the rear panel of the MX525A:
MX525A POWER-DATA Connector
Where:
Pins 1 & 2: Negative GND and +12 VDC power
input.
Pins 3 & 4: MX proprietary message (MPM) input
port.
Pins 5 & 6: GPS output to the MX420 or other
NMEA 0183 compatible devices.
Pins 7 & 8: Beacon monitoring signal output. Sends
the SNR, Signal and Frequency to the
MX420/8 CDU. Connects to Cable B of
the MX420/8 CDU.
Pins 9 & 10: External RTCM Correction (Input).
?
?
?
?
?
?
?
?
?
?
?
Pin#
10
9
8
7
6
5
4
3
2
1
Wire
Prpl/Gry
Purple
White
Yellow
Green
Orange
Brown
Blue
Red
Black
Signal
Ext. RTCM IN -
Ext. RTCM IN+
Beacon status Out +
Beacon status Out -
GPS Out +
GPS Out -
MPM In+
MPM In -
+12-32VDC
Negative GND
POWER
DATA
TNC
Connector
RF