Specifications

12 | Installation
Antenna Mounting
Bracket Mount
The MGL-4 antenna mounting thread is an industry
standard fitting for VHF antenna mounting (1.0 inch, 14
TPI). This enables the antenna to be mounted on a wide
range of mounting brackets, including the swivel joints,
commonly used for angled surface. Refer to the figure
below for bracket mounting illustration.
Hand-tighten the antenna onto the bracket until snug. Do
not overtighten.
MGL-4 Bracket Mounting
1”-14 TPI Stainless
Steel Mounting Bracket
(not supplied)
Secure with plastic
tie wraps
(not supplied)