Specifications

Simrad MS50 – Chapter 4. Data Service4.4
Starting from PC cont’d
Starting from PC cont’d
6 A signal strength bar will appear in the display.
The longer the signal bar or higher the signal strength indicator value,
the better the signal quality. The bar becomes dashed when the
signal strength value reaches 400.
The maximum marker indicates the highest signal strength achieved
during the current search.
8 Selecting the Seek function starts the search again.
New allows selection of a specific satellite:
Scroll down to desired satellite and select:
Note! Searching for a
New satellite should be
done under special
circumstances only.
Searching for any
satellite is the normal
mode of operation
(default).
9 Selecting Ok initializes the system.
10 The equipment is
ready for use when the
Main window appears:
To make a call, see
chapter 2. Operation
Telenor in AOR-E
Dial 00 + country code + subscriber no
27 June 1998 10 : 54
470 SIM Book Last Menu Seek
Ctrl + T for Help <+U> <+I> <+O> <+P>
Satellite search
Searching for t this satellite?
>>>>>>>>>>>>>============== ]
New search satellite
> All
AOR-W
AOR-E
V POR
470 SIM Selct Quit
Ctrl + T for Help <+U> <+I> <+O> <+P>
Satellite search
Found AOR-E. Accept this satellite?
]
Volume^v
Selecting Mute turns OFF
the search tone (Mute Tone).
"Volume" indicator appears when the Tone is ON.
Adjust level with arrow keys.
470 SIM Tone Seek New Ok
Ctrl + T for Help <+U> <+I> <+O> <+P>
Maximum marker
Low high signal strength
Signal strength indication