Specifications

Simrad MS50 – Chapter 2. Operation2.4
Call from Display Handset cont’d
Call from Display Handset cont’d
Switching on
1 If Marine or Voyager Antenna Unit is installed, switch on Antenna
Power Supply.
2 Insert the SIM card (if SIM operated):
3 Press and hold the ON/OFF push button
for 2 secs.
"ON" should
appear in the
display.
Alternatively, press the ON-OFF button on
Simrad MS50.
The red ON indicator should light up:
4 Enter the
SIM PIN code:
If no SIM card is inserted, the
"Phone PIN" must be entered.
Satellite searching
5 Turn on the loudspeaker: . Adjust volume:
LIST
LIST
.
During the satellite search, beep tones will be heard in the Display
Handset (the green indicator L2 will flash in step with the tones):
slow intermittent tones when searching
for any satellite.
rapid intermittent tones when searching
for a specific satellite (faster when
searching for a single satellite).
6 When receiving a satellite signal, a short tone will sound. If it is an
Inmarsat satellite, a continuous tone will sound with varying frequency.
When closing in on a satellite, the tone should increase in frequency.
Note! Searching all satellites is the normal mode of operation.
Search indicator
Call indicator
ON/OFF
ON-OFF
(Not in use)
ON L1 L2
13
456
789
0
ABC
2
DEF
DATA
GHI
JKL MNO PQR
STU VWX
TAX LIGHT
YZÆ
SPCØÅ.
PLAY
ÄÖÜ
ESC
DEL
ON/OFF
LIST
LIST
FUNC ALPHA ENTER
SHIFT
MORE/
HELP
LES
PTT
DIAL 00+INTL
TEL.NO.+
ON
SHIFT BAT
ALPHA
SPC
ON
SIM PIN
?
470
?