Specifications

Simrad MS50 – Chapter 2. Operation 2.3
Volume control
The received volume in the Display Handset may be adjusted during a call:
• Reducing the volume:
• Increasing the volume:
The volume is reset when clearing the call.
Light in display and keys
• Turns on during activity (default)
• For permanent light, press
SHIFT
9
LIGHT
YZÆ
once.
Repeat strokes to turn light off, and repeat again to revert to
"activity" mode of illumination.
Incoming call indicator
flashes when receiving a call to the Display Handset.
The indicator turns off
when the call is
established.
PIN code
The user is prompted for the 4-8 digit Personal Identification Number
each time Simrad MS50 is switched on:
• SIM PIN? (with SIM card).
• Phone PIN? (without SIM card).
Note! The PIN code may also be entered from the PC, if connected,
see "Starting from PC" in chapter 4. Data Service.
Be aware that the PIN protection may have been disabled, see "User
access" in the same chapter.
LIST
LIST
Call from Display Handset cont’d
Call from Display Handset cont’d
Ringing
470
ON