Specifications

Simrad MS50 – Chapter 5. AppendicesC-8
Parity reference number m :
0 = odd
1 = even
2 = mark
Default 3 = space
Example:
AT +ICF =3,3 ç
specifies a data format of 8 data bits,1 stop bit and space
parity.
AT +IFC =
[n<WP -to- PC>] [,m<PC -to- WP>]
;ç
specifies the local flow control between the PC and the
Simrad MS50.
AT +IFC ? ç
displays current settings.
AT +IFC =? ç
displays available settings.
Simrad MS50 - to - PC, reference number n :
0 = no flow control
1 = XON/XOFF (software flow control stripped of control
characters.)
Default 2 = RTS (hardware flow control)
3 = XON/XOFF (software flow control with pass-through
of control characters.)
PC - to - Simrad MS50, reference number m :
0 = no flow control
1 = XON/XOFF (software flow control)
Default 2 = CTS (hardware flow control)
AT +IPR =
[r(PC-to-WP rate)]
ç
specifies the data rate at which PC - Simrad MS50 inter-
face accepts commands.
AT commands cont’d
Appendix C – AT commands cont’d