Installation manual

| 11
Hardware mounting | 10kW and 25kW Installation Manual
Fixing the scanner in place
Both the 10 kW and 25 kW pedestals have four mounting points.
Stick down the mounting template in the desired installation location,
observing correct orientation. Minor deviation can be compensated for in the
radar interface.
Drill pilot holes, followed by the mounting holes to suit mounting fasteners.
When lifting the scanner in place, ensure it is not lifted by the plastic antenna
housing. Any lifting sling should be  tted to lift the scanner via each side of
the metal mounting platform that the antenna attaches to.
Fit the supplied brass inserts to the pedestal mounting holes., followed by
stainless steel bolts, nuts, and spring washers.
 Note: In correct orientation, both the 10 kW and 25kW scanners have the scanner cable exit-
ing towards the stern of vessel.