System information

Alarm system | 73
Seatrial settings
The Seatrial menu presents settings and automatic
calibrations to be performed during seatrial.
The seatrial must always be performed in open
waters at a safe distance from other traffic.
The Seatrial menu can only be accessed if the Dockside
Settings are completed and confirmed.
The seatrial settings are:
- Compass calibration (To automatically
compensate for on-board magnetic interference
and to compensate for a fixed offset (A-error) in
the final heading readout)
- Wind calibration (To compensate for a fixed
mechanical offset of the Wind vane)
- Boat speed calibration
- Transition speed (the speed at which you want to
change the set of steering parameters)
- Automatic tuning (A method of determining the
steering parameters)
1
Compass calibration
Before the compass calibration is started, make sure that
there is enough open water around the vessel to make a
full turn.