System information

Alarm system | 71

Boat type

When the autopilot is configured for Virtual Feedback the

Boat type is automatically set to Outboard.

Rudder Feedback (calibration) (Not applicable for

VRF)

(Default values +/-35° are used)

Refer to pages 64-65 to set the Drive unit voltage and

the D

rive Engage.

Rudder test

To perform the Virtual Feedback rudder test you must be

able to view the movement of the engines/drives

(“rudder”).

Activate the automatic rudder test as shown, following

the instructions on the display.

Confirm by pressing the softkey.

The next step is to enter the correct direction of the

rudder movement.

>3 sec.

If the rudder is not moving so as to give a starboard turn,

press the

softkey, and repeat.

When the rudder starts to move to starboard, release and

press the

softkey to confirm.