System information

Operation | 15

parameter values as set by the Autotune function. If no

Autotune is made (not recommended) the level 4 values

are the factory default values.

A low response level reduces the rudder activity and

provides a more “loose” steering.

A high response level increases the rudder activity and

provides a more “tight” steering.

A too high response level will make the boat start S-ing.

When you access the RESPONSE page the highlighted

Response parameter is the one that is active.

Adjustment of HI and LO values can be performed even

with the boat out of the water.

Range Change per step Default

1-9 1 4

Wind response (sailboats)

Verify that the difference between Course To Steer (CTS)

and the actual heading is at an acceptable minimum.

If the difference between the set wind angle and the

actual wind angle is too big, increase the Wind response

to reduce the difference.