Installation manual

Cable layout
GPT Event and New line
This cable is used to connect the General Purpose Transceiver
(GPT) to external buttons for “Event” and “New line number”
generation. Both cables connect to the 25–pin D-sub connector
on the front side of the GPT.
19
10
New event
Ground
New line
Ground
9
18
W620D
Rev.D
"Event" and "New line" buttons
The cable screen is connected to the plug house.
GPT
25-pin D-sub connector
25
14
1
13
Auxiliary
connector
(female)
SIMRAD
GPT
Use a small spring loaded button, or
connect to a negative pulse.
• Conductors: 2 x 0.22 mm2
• Screen: Overall braided
• Voltage: 60 V
• Maximum diameter: Defi ned by the plugs
304699/A 61