Installation manual

Cable layout
Ethernet cable with RJ45, “crossover”
This cable is used to provide standard ethernet connections. Note
that various categories exists. Cat.5 and Cat.6 cables are used in
local area networks with bandwidth exceeding 100 Mbit
Ethernet cables are available commercially in different lengths,
colours and categories.
W405
Rev.A
Pairs
11
Tx Data+ Tx Data+
Rx Data- Rx Data-
Rx Data+ Rx Data+
Tx Data- Tx Data-
33
22
44
55
77
66
88
RJ45 plug
Ethernet 10Base-T “Crossover”
(White/Orange)
(Orange)
(White/Green)
(Blue)
(White/Blue)
(Green)
(White/Brown)
(Brown)
RJ45 plug
Pin 8
Pin 8
View
Pin 1
Pin 1
In order to prevent noise and crosstalk, you are strongly advised
to use the cable pairs indicated in the drawing.
• Conductors: Defined by the manufacturer
• Screen: Overall screened
• Voltage: Defined by the manufacturer
• Maximum diameter: Defined by the manufacturer
• Termination: RJ45 in each end
304699/A 53