Installation manual

Simrad ES60
ES60/C05 - AC power to computer
This normally a standard power cable, and it is provided with
the computer. Ensure that the computer is set up to match the
AC voltage you have available. Most computers will however
operate on 115 Vac, 230 Vac or both.
The ES60 Marine Computer is provided with a separate power
supply.
Cable details: 230 Vac power cable on page 50.
ES60/C06 - AC power to the display
This normally a standard power cable, and it is provided with
the display. Ensure that the display is set up to match the AC
voltage you have available. Most displays will however operate
on 115 Vac, 230 Vac or both.
Cable details: 230 Vac power cable on page 50.
Note that some older display types may be fitted with a separate
power supply.
ES60/C07 - Serial interface lines (RS-232)
Serial interfaces are used to connect the ES60 Fish finding echo
sounder to other fish finding or navigation systems. All serial
interface cables must be provided by the installation shipyard. If
more than one serial cable is used, add the characters “A”, “B”
to “n” to t he cable identifier.
Cable details:
• Generic RS-232 Serial line cable on page 47
• Cable between ITI and echo sounder on page 64
• Cable between PI44/54 and echo sounder on page 65
• Cable between PI30/32 and echo sounder on page 66
• Cable between SH/SP sonar and echo sounder on page 67
Additional information:
• About NMEA interfaces and telegrams on page 83
• Trawl system interface on page 87
• Catch monitoring system interface on page 88
• Navigation system interface on page 90
• Heave sensor interface on page 90
• Sonar system interface on page 92
• Depth interface on page 94
40
304699/A