Installation manual

Cable layout
List of cables
ES60/C01 - Keyboard
This is a standard keyboard cable, and it is usually fixed to the
keyboard. A keyboard is n
ot provided with the Simrad ES60 Fish
finding echo sounder system. If you wish to connect a keyboard,
you must provide it yourself. T he connection depends on the
make and model of the computer. PS/2 and USB plugs are the
most common types.
The ES60 Marine Computer is provided with a single PS/2
connector to allow for both keyboard and mouse connection. If
you wish to use only a mouse, it can be connected directly to this
input. I f you wish to use both a keyboard and a mouse, a special
adapter is provided w ith the computer. Both the keyboard and
the mouse must be equipped with a PS/2 connector. The ES60
Marine Computer is however also equipped with several USB
sockets. The most convenient method would normally be to use
these for both keyboard and mouse connections.
Adapter: PS/2 Adapter for mouse and keyboard on page 56.
ES60/C02 - Mouse (or other pointing device)
This is a standard mouse cable, and it is usually fixedtothe
mouse. A standard mouse or trackball device is provided with
the echo sounder if you order a computer from Simrad.
ES60/C03 - Display
This is a standard display cable, and it is u
sually provided with
the display. Note that several video form
ats are available. The
VGA/SVGA format using a 15–pin D-sub co
nnector is still the
most common, but other formats have al
so been introduced.
Which cable to use depends on the
display you use and the video
outputs provided by your compu
ter.
Cable details: VGA/SVGA Displ
ay cable on page 54.
Note
You must never disconnect or plug in the display cable while
power is applied to the computer!
ES60/C04 - Printer
A printer can be connected to the computer. A cable for this is
normally provided with the printer. The most common interface
formats are parallel (Centronics) and USB.
Cable details: USB cable on page 55.
304699/A 39