Installation manual

Simrad ES60

ES60 Cable plans

Due to its modular design, the Simrad ES60 Fish ﬁnding echo

sounder can be set up in a variety of conﬁgurations to suit

individual needs for operational frequencies, split beam or single

beam transducers and operational facilities. It is not practical to

deﬁne speciﬁc cable plans for all these conﬁgurations.

To illustrate the cabling, the following basic cable plans are

provided:

• Standard setup with one computer and one General Purpose

Transceiver .

• Standard setup with one computer and more t han one General

Purpose Transceiver.

Note

The Simrad ES60 Fish ﬁnding echo sounder can be set up to work

with maximum four -4- operational frequencies. This means that

you can use four single frequency transceivers (single or split

beam), two dual frequency transceivers, or any combinations

of these.

Legend:

(A) = Display

(B) = Computer (The ES60 Marine Computer may be supplied)

(D) = Junction box for transducer cable (optional)

(E) = Transducer

(F) = Ethernet switch (required when more than one transceiver

is used)

Topics

Cable plan with one transceiver on page 37

Cable plan with two transceivers on page 38

List of cables on page 39

304699/A