Installation manual

Cable layout
Cabling principles
Cable identifications
On the cable layout drawing and in the c orresponding cable
list(s), all cables a re identified with individual cable numbers.
Unless otherwise defined, each cable is identified with a Cxx
number, where xx is an integer.
References are made to dedicated cable drawings. If required,
the shipyard or owner may also identify the cables according
to their own system. Unless otherwise specified, the ES60
documentation will however only refer to the identification
numbers provided by Simrad.
Cable information
A drawing with additional specifications for each cable is
provided. Each cable drawing may, when applicable, include:
• Required minimum specifications
• Connections at each end (including reference to the
corresponding: system unit, terminal board identification and
plug/socket to be used)
• Corresponding terminations
• Number of cores
Systemandshipyardcables
Cables fall into two categories.
• System cables: These cables are supplied by Simrad with the
ES60 system delivery.
• Shipyard cables: These cables must b e provided by t he
shipyard performing the installation, or the shipowner.
Note
Simrad accepts no responsibility for damage to the system or
reduced operational performance caused by improper wiring.
304699/A 35