Installation manual

Simrad ES60
Steel hull
A fairing (A), made by the shipyard, is placed between the
transducer and the hull. It is required in order to adapt for the
deadrise angle of t he hull, and it will also house a cable service
loop (B). The fairing can be made of wood or steel, and should
have the same outline dimensions as the transducer. Remember
to create an air outlet (E) on the fairing, and to fill the bolt holes
with a fi lling compound to ensure a smooth transducer surface.
(CD017007A)
A
A
B
1
2
4
5
3
C
I
D
F
E
(A) = Fairing
(B) = Cable service loop
(C) = Filling compound
(D) = Inclination angle
(E) = Air outlet
(F) = Forward
(I) = Threaded rod with nuts and washers, or bolt
(1) = Steel conduit
(2) = Stuffing tube
(3) = Washer
(4) = Rubber gasket
(5) = Packing nipple
116
304699/A