Installation manual

Drawing file
GPT Transducer plug connection
Rubber sleeve
Rubber sleeve
Retaining ring
Contact body
Plug
fastening ring
Upper plug case
Bottom cap
and cable clamp
Washers
Heat-shrinkable tubing
Lower plug case
Outer screen together with inner screen.
Drain wire, fold back over jacket
and temporary fastened with tape.
Outer screen and inner screen braid wire
untaped and spread out under washer
CD010219A Page 1 of 1
824-201575 Rev.C
Note:
All measurements are in mm.
The drawing is not in scale.
304699/A 105