Installation manual

Installation Manual
20222006 / Rev. A 9
T - joiner
Insert a T-joiner to keep the SimNet intact
Drop cable
When using a T-joiner and a drop cable you can easily
disconnect the drop cable from the product without breaking the
backbone of the network. This method is recommended for
products that are bracket mounted. Products suitable for daisy
chaining can also be connected via a drop cable. In that case only
one of the SimNet connectors needs to be used. The connector
that is not in use should be protected by the SimNet protection
plug on the product itself, or by one from the SimNet accessory
program.
Disconnecting the drop cable has no effect on SimNet