Instruction manual

Configuration and setup
20221560F 119
Providing user training
The user should be instructed in the "basic" operational
functions, such as:
Turning the system on and off
Changing modes. Explain briefly what takes place in the
different modes.
Regaining manual control from any mode. Point out in what
modes the helm is engaged by the autopilot (bypass/clutch).
Taking command at an "inactive" station, if applicable.
Using the lock mode, how to lock/unlock and how to shut the
system down from a locked control unit, if applicable.
Use of the Non-Follow-up steering mode.
Use of a Non-Follow-up controller, if connected.
Changing course by STBD 1, STBD 10, PORT 1 and
PORT 10 buttons.
Stepping through the User Set-up Menu learning how to (and
why to) change the settings.
How to select alternative sources for heading (compass),
navigation (GPS), chartplotter, speed, depth etc. if available.
Understand the difference between NAV mode and NoDrift
mode and their data sources (Nav, Pos)..
Locating compasses and knowing to keep magnetic items
away.
Locating the Mains circuit breaker and the separate SimNet
circuit breaker if provided.