Operation Manual

2.7 SimNet backlight group
The SimNet backlight group function is used to globally
control the light setting for groups of units. This option is
used on larger vessels where many units are connected
via the SimNet network.
By assigning several units to the same group, a backlight
change on one unit will have the same effect on the rest
of the group members.
The SimNet backlight groups are normally configured
during installation, but may be changed at any time.
The following group settings are available:
Parameter Options Default
− Simrad
− None
− 1 - 6
-
Simrad
− Simrad: Default group for IS20
− None: Not assigned to a group
− 1 – 6: Group numbers
18 | Operation