User manual
SimradES70
cSensorInput
Thedistanceinformationisreceivedusingappropriatedatagram(s)froman
externalsource.
2Port
SelectwhichserialorEthernetporttouseforthiscommunication.
3Setup
OnceyouhaveselectedaserialorEthernetcommunicationport,clickthisbuttonto
setuptheapplicableportparameters.Therelevantportsetupdialogopens.
→SerialPortSetuponpage244
→LANPortSetuponpage240
4NMEASentence
SelectwhichNMEAsentencetobeusedforthecommunication.
aVLW
Thistelegramcontainsthedistancetravelledrelativetothewaterandover
theground.
→VLWDualground/waterdistanceonpage271
5TalkerID
IfyouwishtospecifyadedicatedTalkerIDonthetelegramformat,itcanbe
selectedhere.
TheTalkerIDisthersttwocharactersintheNMEAsentence.SelectNoneto
acceptalltalkeridentiers.
Tip
IfyoudonothaveacomputerkeyboardconnectedtoyourES70system,clickthe
Keyboardbuttontoopenanon-screenkeyboard.
6Distance
Thecurrentvesseldistancecanbesetmanuallyusingthespinbox
ThisparameterisnotavailableifSourceissettoSensorInput.
Relatedtopics
•Externalinterfaceproceduresonpage93
•Setupmenu;functionsanddialogsonpage186
•LANPortSetuponpage240
•SerialPortSetuponpage244
•AbouttheNMEAtelegramformatonpage263
•Telegramformatsonpage263
198
338106/C