User manual
SimradES70
4Rename
Thisbuttonisusedtorenameoneofthesavedsettings.
Torenameasetting,clickthesettingname,andthenthisbutton.Adedicateddialog
openstoacceptthenewname.
Tip
IfyoudonothaveacomputerkeyboardconnectedtoyourES70system,clickthe
Keyboardbuttontoopenanon-screenkeyboard.
Thefactorysetting(s)cannotberenamed.
5Delete
Thisbuttonisusedtodeleteoneofthesavedsettings.
Todeleteasetting,clickthesettingname,andthenthisbutton.Adedicateddialog
openstoverifyyourchoice.
Thefactorysetting(s)cannotbedeleted.
6SaveCurrentSetting
ThisbuttonisusedtosavethecurrentlyappliedES70settings.
Tosavethesettings,clickthisbutton.Adedicateddialogopenstorecordthename
ofthenewsettings.
Tip
IfyoudonothaveacomputerkeyboardconnectedtoyourES70system,clickthe
Keyboardbuttontoopenanon-screenkeyboard.
YoucanonlyaddsettingstotheSavedSettingslist.
Relatedtopics
•ChoosingES70factorydefaultsettingsonpage49
•Savingthecurrentusersettingsonpage48
•Usingpreviouslysavedsettingsonpage49
•Mainmenu;functionsanddialogsonpage156
Range
TheRangefunctionismadeavailablebyclickingtheRangebuttonontheMainmenu.
Purpose
TheRangefunctionallowsyoutospecifytheverticalrangeofthewatercolumncovered
bytheechogram.Therangeisdenedfromaselectedstartrange,anddowntoavalue
beneaththecurrentbottomdepth.Thevalueshownandselectedisbydefaultapplied
onlytothecurrentlyselectedechogram.
158
338106/C