Unit installation

FS 70 Installation Instructions
974-24007001/4.1 59
4.3.19 Add User Setting
After you have completed your system configuration you should
save your setting,
Go to the Header Menu and click on “Configuration”. Next click on
“USERS”, then Click on “DEFINE”. The following window will
pop up.
If you want to Add a User, the next step is to click “Add” then type
your name in the User 1 window. Next click on “Apply” then
“OK”.
The next time you start up the system, the “Select User” window
will pop up automatically. You must then select the type of Fishery
or User setting you want and “CLICK”. The system will start up
with your personal setting.
When you Exit the system, the system will request if you want to
save your setting. Just click “YES” or “NO”
NOTE: After the Service Engineer has completed the initial
Setup and Sea trial, we recommend that all the settings are
saved in the “GENERIC” setting or in a specific file created as
a reference in case a problem occurs.
Do not change the “GENERIC” setting. If you have a problem, just
go back and select the “GENERIC” setting, or to your specific file.