Unit installation

FS70 Trawl Sonar System
46 974-24007001/4.1
4.3.7 FS 70 Start-up Procedure
For the purpose of demonstrating the Start-up Procedure in this
chapter, we are using the recommended Processing Unit that has 2
COM Ports, COM 1 and COM 3. The COM 1 and COM 3 Ports
from the Processing Unit are not connected to the FS TTM module
RS 232 port “A”. No communication will be made from the COM 1
or COM 3 to the TTM module. We will be using an RS232/USB
telemetry converter “KML-USB1” connected to the “A” port of the
TTM module
We will be using an FS 70, 120 kHz/40 kHz Catch Trawl Sonar
Head with the 200 kHz net sounder option with the integrated
sensor module.
Configuring the System for the first time, or if you have replaced
the Processing Unit or the TTM Module, you will select and
“Click” on “Setup Page” and then the following window will pop
up.
Next: Select “Connect Sonar” menu and “Click”. The following
“System Configuration” window will pop up, next “Click” on
“Detect Heads”.