Unit installation

FS 70 Installation Instructions
974-24007001/4.1 43
4.3.3 Security Firewall Protection System Set-Up
The Firewall protection is an important part of the processor unit.
There is no problem in having the security protection disabled
providing the processor in not connected to any outside provider
“Ethernet” or connected to a central internal “Hub” system.
We recommend that the “Firewall” protection be ENABLE at all
times. The following chapter will explain the proper procedure to
Disable/Enable the firewall protection.
Go back to your local Area connection properties as indicated in the
below window, next Click on the “advanced” tab then the following
window to the left of the screen will be displayed.
Next, click on “Advanced > Settings” you have to disable the
Firewall as indicated in the following window below. Then you
may turn On or Off the Firewall protection, next Click OK to save
your setting.