Unit installation

FS 70 Installation Instructions
974-24007001/4.1 41
Next, scroll down to the “Internet Protocol (TCP9/IP) as indicated
in the above window and left click on “Properties” The following
window below will pop-up.
Next, you will have to disable the “Obtain an IP address
automatically” and select “Use the following IP address” The
following window below will pop-up.
Next, enter the above IP address “192.168.000.70” and the Subnet
mask ”255.255.255.0”. Note! The above “IP” address is
programmed by KML in the Ethernet Server Devise converter and
can’t be change in the field. Next, click OK to save the new IP
address, then the following window below will pop-up.
Next, Click on OK to exit the above dialog window. After you have