Unit installation

FS 70 System Operation
974-24007001/4.1 27
Right Click on the “AUDIO” button located in the SETUP Page to
open the Audio Settings dialog window. After you have completed
your changes click “Apply”. If you are satisfied with your selection
Click “OK”
Next, go to the “Operation Page” to turn OFF or ON the Audio.
3.7 Activating the Sonar
When you click on the Run button the system will initialize the
serial port. and start the calibration of each sonar head connected to
the TTM module. When you click the Stop button you will
automatically disconnect the sonar heads from the system.