User guide

901-10037001/1.1 FS 20/25 Operators Manual
Page 4.34 FS 20/25 Installation, System Set-Up and Test
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
4.5 SAVE USER SETTING
After you have completed your system configuration, you should “SAVE” your
setting. Go to the Header Menu and “Click” on “Configuration”. Next “Click” on
“USERS”, then “Click” on “DEFINE”. The following window will pop up.
The next step, if you want to Add a User, “Click on “Add”, then type the name in the
“User Information” window. Next “Click” on “Apply” then “Click” on “OK”
The next time you start up the system, the “Select User” window will pop up
automatically. You must select the type of Fishery or User setting you want to run
and “Click” “OK”.
When you Exit the System from the “File” Header Menu, the system will request “Are
you sure you want to exit?” “Click” on “Yes”. Then the System will request “Do you
want to save settings?” “Click” on “Yes” if it his new settings or “No” as you prefer. If
you “Click” on “Yes” the following window will pop up.