User guide

901-10037001/1.1 FS 20/25 Operators Manual
Page 4.30 FS 20/25 Installation, System Set-Up and Test
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
4.4.16 Save User Setting
After you have completed your system configuration, you should save your setting,
Go to the Header Menu and CLICK on “Configuration”. Next CLICK on “USERS”,
then CLICK on “DEFINE”. The following window will pop up.
The next step, if you want to Add a User, CLICK on “Add”, then type your name in
the User 1 window. Next CLICK on “Apply” then “OK”.
The next time you start up the system, the “Select User” window will pop up
automatically, then you must select the type of Fishery or User setting you want to
select and “CLICK”. The system will start up with your personal setting.
When you Exit the system, the system will request if you want to save your setting.
Just say “YES” or “NO”
Note: After the Service Engineer has completed the initial Setup and Seatrial, we