User guide

FS 20/25 Operators Manual 901-10037001/1.1
FS 20/25 Installation, System Set-Up and Test Page 4.23
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
4.4.9 FS 20 Head Setting
Position the cursor on the “CONTROL HEAD” key, (The one with the small sonar
head located on the TOOL BAR) and CLICK. The following window below will pop
up.
By clicking on the appropriate “KEY”, you will be able to setup your Scan option. You
also have full control of the Scan mode via the operator control panel.
Mote: The “Tilt” and “Stabilization” is only available on the FS25 System.