User guide

FS 20/25 Operators Manual 901-10037001/1.1
FS 20/25 Installation, System Set-Up and Test Page 4.19
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
4.4.5 FS 20 or FS 20/25 RUN UP Procedure
After you “Click” on the “RUN” Icon, the system will automatically detect and setup
the sonar heads attached to the trawl cable. This operation will take approx. 40 sec.
After the system RUN UP is completed, the best way to setup your windows is to
“Click” on the Tool Bar “Tile Windows” Icon located to the right end side of the Tool
Bar. By clicking on the individual window, you can rearrange, change the size, as
you prefer, etc.
Refer to the following window
From that point on by clicking on the “FS 20”, TS 15 Sounder or the FS 25 window
you will have control over the selected Sonar. The sonar you have selected will be
highlighted by a blue bar across the top..