User guide

901-10037001/1.1 FS 20/25 Operators Manual
Page 4.18 FS 20/25 Installation, System Set-Up and Test
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
The “System Configuration” window will pop up. “Click” on “Detect Heads”
“Click” on “Apply” next “Click” “OK”. From the Operating System window, “Click” on
the “RUN” Icon to start the System.
In the event that part of the system gets changed out with a new component (i.e. a
different TTM, a change in software, etc), you might find that the Sonar Head
Confirmation window might appear. It will ask you if you want to reconfigure “Click”
on “NO”, then go back to the “Header Menu” “Click” on “Configuration” and re-start
the system set-up as per outline in Paragraph “4.4.3” or “4.4.4”.