User guide

FS 20/25 Operators Manual 901-10037001/1.1
FS 20/25 Installation, System Set-Up and Test Page 4.13
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
enabled yet (no red check mark beside Com 1). If you “Click” on “Detect Heads”
from this position, the following warning window will pop up.
This warning window indicates that “No Ports have been enabled”; just “Click” “OK”.
The “System Configuration” window will reappear. Use the mouse to highlight COM
1. Note that the COM 1 Configuration will now be displayed. Use the mouse to
“Enable for Head Control” (Left button click, check mark in box to enable).
“Click” on “Apply”. The following window will appear, overlaying the above window,
asking you to reboot the computer. Just “Click” “OK” (the “FS 20/25” window will
disappear) and do not “Reboot the computer now”; “Click” “OK” in the “System
Configuration” window.