User guide

901-10037001/1.1 FS 20/25 Operators Manual
Page 4.12 FS 20/25 Installation, System Set-Up and Test
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
Configuring the System for the first time, or if you have replaced the HP/PC
processing unit or the TTM Module, you will select and “Click” on “Generic” and then
“Click” on OK.
The next Window will pop up
Go to the header menu, “Click” on “Configuration” and a dialogue window will pop
up. Next “Click” on “Connect Heads”. The following window will pop up.
After the “System Configuration” Window pops up, note that Com 1 has not been