User guide

FS 20/25 Operators Manual 901-10037001/1.1
FS 20/25 System Operation Page 3.
7
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
3.2.6 Clear Display
The Clear Display Icon is used to clear the sonar image on the active window.
3.2.7 Run and Stop
The Run Icon is used to start up the sonar system. When you click on the Run
Heads Icon the system will initialize the serial port, and start the calibration of each
sonar head connected to the TTM module. When you click the Stop Icon you will
automatically disconnect the sonar heads from the system.
Note: If you want to “PAUSE” the sonar image only just click on the Pause Button
Icon located on the left side of the Run Icon. Re click to start the system up.
3.2.8 Play FWD Pause Record
These Icons are used to start the sonar images recording and stored in a data files
bank, the stored data files can be Played Back at a later date. The Pause Icon will
stop the sonar playback images. You can also Fast Forward play the sonar images.