Installation manual

SimradEK60
ThesesoftwareutilitiesareallavailableontheUSBmemorydevicethatisprovidedwith
thesonar.RegistereduserscanalsodownloadtheutilitiesfromtheS
i m r a d D e a l e r C l u b .
1Makesurethatyouhaveallthenecessarysoftwareonyourcomputer.
ThelescomprisingDOS7mustbeplacedinaseparatefolder.
2InserttheUSBmemorydeviceyouwishtoformat.
3StarttheWindowsversionoftheHPutility(hpusbfw.exe)
4ObservethattheUSBmemorydeviceis
recognizedbytheutility.
5Set“Filesystem”toFATorFA T32.
6Entera“V olumelabel".
7Clickto“CreateaDOSstartupdisk”
8Identifythefolderonyourharddiskthatcontains
theDOS7les
9ClickStart.
10Waitfortheformattingprocesstonish.This
willtakesometimedependingonthesizeofthe
USBmemorydevice.
11CopyalltheDOS7lesfromthefolderonyour
harddisktotherootdirectoryontheUSBmemory
device.
12Verifythatthe“autoexec.bat”leispresentintherootfolderoftheUSBmemory
device.
13Modifythe“autoexec.bat”leasrequired.
Use“Notepad”orasimilarASCIIeditor.Thelastlineinthebatchlemustcontain
theline“ghost.exe”.
14CopyovertheNortonGhost8application(ghost.exe)totherootfolderofthe
USBmemorydevice.
15TheUSBdeviceisnowformattedasabootdrive,anditispreparedtobeusedfor
backuppurposes.
16Closedownalltheutilitiesyouhaveused.
17RemovetheUSBmemorydevicefromthecomputerusingthe“Safelyremove
hardware”featureintheoperatingsystem.
26
359619/A