Installation manual

Drawing file
ø35
ø65
Stuffing tube
Washer
Rubber gasket
Washer
Packing nipple
Service loop
on cable
Minimum
400 mm
Steel conduit
Air/water outlet
(optional) near
the echo sounder,
above water level
Recommended transducer location
Approx 3 deg
X
Min. X/4
Minimum
400 mm
FWD
Sections seen from top
of the transducer
1 - Aft starboard
1
2 - Aft port
2
3 - Fore
4 - Not used
Screen to echo
sounder chassis
3
Steel conduit:
Recommended to minimize electrical interference.
Minimum inside diameter: 35 mm
Wall thickness: 6 mm (or 4.5 mm if galvanized
conduit is used)
CD017015D Page 2 of 2
820-203428 Rev.B
Note:
All measurements are in mm.
The drawing is not in scale.
305176/A 39